Get a Quote

hardness of steel ball valve 1 4

May 26, 2021 Seated ball valve hardness of the ball and seat contact surface matching. The metal sliding contact surface must have a certain hardness difference, otherwise it is prone to seizure. In actual application, the hardness difference between the valve ball and the valve seat is generally 5-10HRC.

Get Quote
Carbon Steel Ball Valves NIBCO.com

Carbon Steel Ball Valves NIBCO.com

Valve pressure rating 2000 psi 138 bar non-shock cold working pressure (3/8 to 1 ), Valve pressure rating 1500 psi 103 bar non-shock cold working pressure (1-1/4 to 2 ), Maximum temperature rating 400 F, Conventional port, Blowout-proof stem, Stainless steel ball and carbon steel stem, Vented ball, Standard lever handle, Threaded end connections

More
Steel Ball Valves McMaster Carr

Steel Ball Valves McMaster Carr

Valve Type: Ball. For Use With: Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon. Seal Material: PTFE Plastic. Bolt these valves to flanges to divert flow between ports in flanged pipelines. Any port can be used as an inlet or an outlet. Turn the handle to direct flow from the inlet port to either outlet port.

More
Stainless Steel Ball Valves Valves The Home Depot

Stainless Steel Ball Valves Valves The Home Depot

Apollo 1/2 in. x 1/2 in. Stainless Steel FNPT x FNPT 2-3/4 in. L Full-Port Ball Valve with Latch Lock Lever

More
Stainless Steel Ball Valve 5000 psi 304 316 Floating

Stainless Steel Ball Valve 5000 psi 304 316 Floating

Various types of 3 way stainless steel ball valves. Stainless Steel Sanitary 3PC Tri-Clamp Ball Valve. DN500 Stainless steel 304 industrial ball valve. ASTM-A351 2 inch stainless steel ss316 ball valve. Stainless Steel 304 Female Threaded 1/2 Inch Mini Water Ball Valve. Stainless steel flange 316l ball valve.

More
COMMON METAL TYPES USED IN VALVE MANUFACTURE

COMMON METAL TYPES USED IN VALVE MANUFACTURE

high strength and hardness. 17.4 PH withstands corrosive attack better than any of the 400 series stainless steels and in most conditions its corrosion resistance closely approaches that of 300 series stainless steel. 17.4 PH is primarily used as a stem material for butterfly and ball valves as well as any valve application requiring a superior ...

More
Bal tec Ball Material Selection

Bal tec Ball Material Selection

Ball Materials 1018 Soft Mild Steel. Type 1018 soft mild steel has a very low carbon content. This steel is not hard. It can be machined, drilled and tapped. This material is highly magnetic. It will be strongly attracted by a magnet. This is one of the most weldable steel alloys. Hardness is rated at 28 HRC. 17-4 …

More
GROVE B4 B5 and B7 Side Entry Ball Valves

GROVE B4 B5 and B7 Side Entry Ball Valves

1 Body 39 Drain Valve 150 Upper Thrust Washer 2 Closure 50 Seeger Ring 153 Drive Pin 4 Ball 80a Lower Trunnion Fire-safe Seal 165 Bearing Housing 5 Stem 118 Standard Seat Ring 168 Stem Bearing 7 Wrench Unit 119 Seat Insert 169 Lower Trunnion 8 Closure O …

More
Metal Seated Ball Valve Metal Seated Zero Leak Ball Valve

Metal Seated Ball Valve Metal Seated Zero Leak Ball Valve

Metal-seated ball valves that provide superior operation at high temperatures as well as providing abrasion resistance in demanding applications. Coating options: Chrome Carbide, Tungsten Carbide, WC, Stellite etc. Metal Seated Ball Valves are ideal for …

More
FLOATING BALL VALVE CATALOG

FLOATING BALL VALVE CATALOG

Three-Piece Floating Ball Valve Firesafe 1/4” to 2” 800, 1500 & 2500# Threaded or Socket Weld 7811, 7817, 7511, 7517, 7211, 7217 FLOATING BALL VALVES This product line is used primarily in the Oil & Gas, Building and construction Industries, Chemical and Petrochemical services, among

More
stainless steel Ball Valves Ferguson

stainless steel Ball Valves Ferguson

NIBCO S-585-66-LF 1 in. DZR Silicon Bronze Full Port Solder 600# Ball Valve. FNW 1-1/2 in. 3-Piece Full Port 1000 PSI CWP Stainless Steel Ball Valve with Socket Ends. FNW 1/4 in. Full Port 2000 PSI CWP Stainless Steel Ball Valve with Threaded NPT Ends.

More
Ball Valve Coatings Different Coats for Different Apps

Ball Valve Coatings Different Coats for Different Apps

Aug 19, 2021 Coatings protect valves and actuators against wear, erosion, chemical attack and other forces that threaten their durability and effectiveness. But because they are faced with such a diversity of challenges, there are a broad number of differences in the types of coatings used. The coatings used for ball valves have their own set of characteristics that differ in many cases from other types of ...

More
Stainless Steel Ball Valve 2 piece 3 Piece SS Ball Valves

Stainless Steel Ball Valve 2 piece 3 Piece SS Ball Valves

Our ball valves are manufactured in high grade 316 stainless steel. However, we do offer some variations in SS 304 for better pricing. Two piece stainless steel valves are quickly becoming the most widely used threaded ball valve, replacing traditional brass ball valves due to their cost and durability. Resellers please call for special pricing.

More
TFM TM Manual Ball Valves Grainger Industrial Supply

TFM TM Manual Ball Valves Grainger Industrial Supply

Stainless steel valves are constructed of an alloy of iron and chromium. They are more malleable than carbon steel, and are very resistant to rust and corrosion. 316 Stainless Steel offers higher corrosion resistance than 304 stainless steel. It includes up to 3% molybdenum, which helps prevent corrosion from many industrial chemicals and solvents.

More
BALL VALVES

BALL VALVES

One of the most trusted ball valves in the petroleum and chemical process industries, combines the strenght of its components with a dependable and compact design. BV ball valves satisfy a wide range of ASME, ANSI and API standards. Available in cast steel and forged steel, with various trims, they may be specified in sizes from 1/4 to 60 ...

More
Ball Valve Tech Doc rev4.21 BELIMO Holding AG

Ball Valve Tech Doc rev4.21 BELIMO Holding AG

3 Ball 316 stainless steel 4 Seat (x2) reinforced PTFE w/ Durafill 5 Retainer B16 ( ” - 1”) stainless steel B584 (1 ” - 2”) stainless steel 6 Gland B16 brass 7 Stem 316 stainless • ”steel 8 Jam nut stainless steel 9 Body seal PTFE (1-1/4” to 2”) 10 Body B584-C84400 bronze 10 Pressure rating 600 psig WOG

More
Series 51 52 Flanged Ball Valves Pneumatic Control

Series 51 52 Flanged Ball Valves Pneumatic Control

of controlled composition and hardness. Available on Series 51/52 and AF 51/52. ... 4 Series 51/52 Flanged Ball Valves FCD WCABR1013-01 Flow Control Division Worcester Controls Features and Benefits Sizes: 1/ ... Pipeline valves (2 –8 carbon steel and stainless steel). Specify V …

More
Ball Valves

Ball Valves

Ends), ANSI B16.10 (Face to Face and End-to-End Dimensions of Valves) are also used for the design of ball valves. Also our ball valves are designed to meet FIRE SAFE requirements to BS6755, API 6FA and API 607. Final testing is done to conform API 598 (Valve Inspection and Testing) MSS-SP-61 (Pressure Testing of Steel Valves) API

More
Stainless Steel Ball Valve manufacturer India in Grade 304

Stainless Steel Ball Valve manufacturer India in Grade 304

Manufacturer & supplier of SS316 Ball Valve and A351 CF8 304 2 Piece/ 3 Piece Ball Valves in Mumbai. A Stainless Steel Ball Valve is a kind of quarter-turn valve. The versatile and popular SS304 Ball Valve uses a hollow, perforated and pivoting ball, which in turn is used to control the flow. The 1/2 Inch Stainless Steel Ball Valve is said to be open when the ball's hole is in line with the flow.

More
Amazon.com Sisenny 1 Inch BSP Floating Ball Valve Male

Amazon.com Sisenny 1 Inch BSP Floating Ball Valve Male

QWORK Stainless Steel Floating Ball Float Valves 1/2 inch DN15 Adjustable Male Thread Water Float Sensor Hydraulics, Pneumatics & Plumbingall 4.1 out of 5 stars 154 1 offer from $11.97

More
Stainless Steel 316 Mini Ball Valve 1 000 PSI WOG

Stainless Steel 316 Mini Ball Valve 1 000 PSI WOG

Stainless Steel Mini Ball Valves (or miniature ball valves) are made for use in confined spaces. With a pressure rating of 1,000 PSI (water, oil or gas) and made out of SS 316, this line of valves outshines the rest of the mini ball valves available on this site.

More
316 Series Stainless Steel Closed Cavity Low Pressure

316 Series Stainless Steel Closed Cavity Low Pressure

Model 237542 has a 1 in. length of tubing on one end, for connecting the valve to a compression fitting. The other end has a compression nut for connecting the valve to tubing. Tubing Selection Tubing material, hardness, surface finish, and wall thickness must be considered to ensure the proper installation and operation of the ball valves ...

More
Stainless Steel Ball Valves Valves Online

Stainless Steel Ball Valves Valves Online

Stainless Steel Ball Valves including 2 piece stainless steel ball valves, 3 piece stainless steel ball valves, flanged stainless steel ball valves and 3 way stainless steel ball valves, hygienic ball valves, Mars Ball Valves, WRAS, fire safe and ATEX ball valves. All valves are available to buy online from Valves Online, the UK's leading online supplier of stainless steel ball valves.

More
Ball Valves Manufacturing Range amp Features Ringo Valves

Ball Valves Manufacturing Range amp Features Ringo Valves

API6A Ball valves. For upstream applications, three pieces side entry ball valve is used in accordance with the requirements of API 6A. Valve classes from class 2000 to class 20000 In sizes from 2-1/16” to 7-1/16” are available. Material selection is done in full compliance with API 6A requirements.

More
Steel Ball Valves F14AZ TDZ F14A

Steel Ball Valves F14AZ TDZ F14A

Full Port, Split Body, Side Entry Ball Valves For sour service Hardness of body, body cap, ball and stem material of KITZ Class 150/300 steel ball valves are controlled by appropriate heat treatment and conformed to the hardness requirements in NACE MR0103, as standard. In addition to the above, following requirements are optionally available.

More
1 4 quot Balls McMaster Carr

1 4 quot Balls McMaster Carr

These balls are hardened for increased wear and abrasion resistance. 440C is one of the hardest types of stainless steel after heat treating. It's often used for bearings and valves. This material maintains its corrosion resistance in temperatures up to 800 F.. For technical drawings and 3-D …

More
ASME B16.34 Manual Ball Valves Grainger Industrial Supply

ASME B16.34 Manual Ball Valves Grainger Industrial Supply

Stainless Steel Inline Fire Safe Ball Valves, 1-Piece Valve Structure. Purchased products. ... Carbon steel valves can withstand high pressure, but are susceptible to corrosion and can also be brittle due to the hardness of the material. Brands. Carbon Steel Inline Ball Valves, 1-Piece Valve Structure ...

More
Maybe You Will Be Interested